Re: VMDirectPath - not selecting the boot usb
The graphics card actually works very well. Under windows7 you can set the extra adapter as your primary display. Somewhere during the startup process the output then switches from the VMware "display" to the VMDirectPath video card attached display.
Only problem I have is that if the virtual PC goes into Suspend mode I cannot get it back online with the VMDirectath mapped mouse/keyboard.
The graphics card I'm using is a Sapphire Radeon 4550 512MB/PCI-Ex16.
I know this is an old post but maybe you are still around.
I try to setup a VMDirectpath to a GV-R435OC-512I (Radeon HD 4350). In the ESXi 4.1 configuration all looks good. In the virtual machine running Windows XP I can install the drivers from ATI and it all looks OK in the device manager. When I try to extend the display to the ATI card or change the primary video adapter to the ATI card I get a BSOD saying that ATI2DVAG has crashed. Do yo have any suggestions for me? (I used the latest ATI drivers, also I disabled hardware acceleration and write combining).