|
|
|
|
Realtek test drivers of ESXi 5.0
| Author |
Message |
|
ichi
Joined: Wed Feb 16, 2011 6:26 am
Posts: 35
Location: Japan
|
 Re: Realtek test drivers of ESXi 5.0 Mr. ekipz,
Your procedure is satisfactory.
Although I think that it is because the version of libata probably changed, I do not understand for details, either.
Although it seems to be good to use the source file of kernel 2.6.24, many symbol problems are unsolvable.
I am sorry that a help is impossible.
Best regards.
|
| Sun Jan 08, 2012 6:44 am |
|
|
|
ichi
Joined: Wed Feb 16, 2011 6:26 am
Posts: 35
Location: Japan
|
Re: Realtek test drivers of ESXi 5.0
|
| Sun Jan 15, 2012 4:37 am |
|
|
|
ehidle
Joined: Thu Dec 30, 2010 7:55 am
Posts: 102
|
Re: Realtek test drivers of ESXi 5.0 ichi,
Do you (or anyone else?) know what Linux kernel headers version is needed to develop drivers for 5.0?
|
| Mon Feb 06, 2012 4:46 pm |
|
|
|
infrared
Joined: Sat Feb 04, 2012 12:25 pm
Posts: 5
|
Re: Realtek test drivers of ESXi 5.0 Hello i am trying to enable the on board NIC with no success.
I have Asus P5K SE/EPU
lspci -v list the NIC like this:
000:002:00.0 Ethernet controller Network controller: Atheros Communications P5KPL-VM Motherboard
Class 0200: 1969:1048
the commands i give is :
esxcli software acceptance set --level=CommunitySupported
esxcli software vib install -v /vmfs/volumes/datastore1/ net-atl1e-1.0.1.14.x86_64.vib
The result of the first command is ok
The result of the second is this:
Installation Result
Message: Host is not changed.
Reboot Required: false
VIBs Installed:
VIBs Removed:
VIBs Skipped: AR81Family_bootbank_net-atl1e_1.0.1.14
am i doing something wrong ?
Regards
Michael
|
| Wed Feb 08, 2012 6:26 am |
|
|
|
peetz
Joined: Mon Jul 25, 2011 2:22 pm
Posts: 73
|
Re: Realtek test drivers of ESXi 5.0 You will see this message when the package is already installed.
Check with
esxcli software vib list
- Andreas
_______________________________________________________________________________________  ESXi-Customizer: A Windows script to customize ESXi 4.1 and 5.0 ESXi5 Community Packaging Tools: Create VIB files and Offline bundles from TGZ files
|
| Wed Feb 08, 2012 9:14 am |
|
|
|
infrared
Joined: Sat Feb 04, 2012 12:25 pm
Posts: 5
|
Re: Realtek test drivers of ESXi 5.0 It is true, with this command i found that this vib is allready install. The problem is why the nic not working. The address of the nic is 1969:1048 and in this link viewtopic.php?f=24&t=3494&start=20says it is supported. What am i doing wrong ? Any help please ?
|
| Wed Feb 08, 2012 11:07 am |
|
|
|
peetz
Joined: Mon Jul 25, 2011 2:22 pm
Posts: 73
|
Re: Realtek test drivers of ESXi 5.0 Hi,
the mapping for the device 1969:1048 is missing from ichi's original package.
I modified it to include the mapping. Try the attached file.
Remove the original package with
esxcli software vib remove net-atl1e
then install the attached one.
- Andreas
_______________________________________________________________________________________ ESXi-Customizer: A Windows script to customize ESXi 4.1 and 5.0 ESXi5 Community Packaging Tools: Create VIB files and Offline bundles from TGZ files
|
| Thu Feb 09, 2012 1:50 am |
|
|
|
infrared
Joined: Sat Feb 04, 2012 12:25 pm
Posts: 5
|
Re: Realtek test drivers of ESXi 5.0 I installed the driver but the Nic refuse to work .
The command esxcfg-nics -l does not listed.
Anyway peetz many thanks for your help and your time.
Michael
|
| Thu Feb 09, 2012 2:29 am |
|
|
|
mohd81
Joined: Mon Feb 13, 2012 1:06 am
Posts: 1
|
Re: Realtek test drivers of ESXi 5.0 Hi All,
I have on board NIC Realtek 8111DL (Intel DG41WV) which was not detected by the ESXi 5.0 installer, so i tried to use som TGZs with no luck, then i bought a D Link dge 528T PCI and also not detected even with the TGZs and the VIBs in this thread.
Any help?
|
| Mon Feb 13, 2012 1:11 am |
|
|
|
peetz
Joined: Mon Jul 25, 2011 2:22 pm
Posts: 73
|
Re: Realtek test drivers of ESXi 5.0 _______________________________________________________________________________________ ESXi-Customizer: A Windows script to customize ESXi 4.1 and 5.0 ESXi5 Community Packaging Tools: Create VIB files and Offline bundles from TGZ files
|
| Mon Feb 13, 2012 1:50 am |
|
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
