AMD Phenom II X6 1090T
4x4GB DDR3-1333 (PC3 10600) GeIL
HP NC360T Dual GB NIC
1x 2TB // 2x 1TB HDD
8GB USB Stick (Boot Drive)
Lian Li V352 Case (do not use the card-reader!!!!)
No IOMMU => This chipset does not support IOMMU
It works (including the onboard NIC)!
Picture.PNG [ 59.03 KiB | Viewed 2788 times ]
The language is German.....
C1E needs to be switched off in Bios
USB3 needs to be switched off in Bios
Need a Boot-CD for USB-Stick
Driver for Realtek onboard-NIC must be added
I recommend a different board, this one is probably not the ideal choice for ESXi. For a serious use, a RAID-Controller is needed and there are only 2x PCIe 1x left. My PCIe 16x slot is occupied with the HP NC360T Dual Gigabit NIC. You could switch the HDDs for SSDs in order to improve IOs, but that is an expensive option.